Ex-88, Pour On Finish Two Gallon Kit, (1 gallon resin, 1 gallon hardener.) Notice:   ORM-D Consumer Commodity Product.  For Air Shipments this product is classified as Hazardous.  Additional HazMat Fees apply.  See Terms and Conditions. EX-88 is an extremely clear, tough, high gloss surface coating formulated to produce a deep glass like appearance in a single layer on a sealed surface. Two or more layers are often applied for added depth and protection. EX-88 has an extended "open time" which allows up to 30 minutes in the mixing container at 70º F and up to one hour working time on the surface being coated. EX-88 is waterproof, heat and alcohol resistant. EX-88 is packaged in one gallon and 50 gallon containers for the industrial user. This is a clear, low odor, solvent free product intended to be used primarily on wood, metal & glass.
Technical Data Thin film set time at 77º F / 25º C 6 hours 7 day hardness - Shore D 68 Tensile Strength 2788 Tensile Modulus 72,260 Tensile Elongation % 64 Flexural Yield Strength 1136 Flexural Yield Strain 6.3 Flexural Yield Modulus 56,511 Glass Transition Temperature 117º F / 47º C Viscosity Range at 70º F / 21º C EX-88 Resin 5800 to 7000 cps EX-88 Hardener 5200 to 6400 cps Cure Schedule Temperature Dust Free Hard Cure 70º 80º 90º Coverage: One U.S. gallon covers approximately 32 sq. ft. One coat is approximately 3/32" thick. Results can vary based on mix time, room / product temperature and ratio of mix. EX-88 performs best at a room and product temperature of 75º F. When hand mixing, whip resin and hardener together for at least two minutes in a straight sided, flat bottom container.